Portable Digital PH Meter Pen with LCD

  • $18.99
  • Regular price $28.17

Key Features:

  • Easy to Use: Simply immerse the pH meter electrode in the solution to be tested, readings are quickly displayed on a large LCD display.
  • Many Applications: Ideal instrument for hydroponics, aquariums, the fishing industry, swimming pools, spa, school laboratories, food & beverage, drinking water etc.
  • Auto Calibrated: Features built-in calibration with 2 buffer powders (included). Just press a button to finish the calibration. This pH meter is factory calibrated. You can use it immediately.
  • Fast and Accurate Results: No need to work with those annoying color charts and test strips. Resolution: 0.01 pH,  Accuracy: ±0.01 pH
  • Compact Portable Design: Pocket fitting pH meter that's also lightweight and compact. It is easy to carry in your bag or pocket.


Display: LCD Digital
Accuracy: 0.01
Resolution: 0.01
Operating Temperature: 0~60°C
Measuring Range: 0.00~14.00
Probe Type: Precision glass bulb electrode

Included in Package:  

  • One pH Meter
  • 2 Bags Buffer Powder
  • Instruction Manual


  • If the tester hasn't been used for a long time: recalibrate it.
  • If you open battery case or replace battery: recalibrate it.
  • The glass bulb of the electrode is fragile. Don't touch it with hard tools and fingers,  be very gentle when cleaning.
  • This item come without retail box and battery, and it need an LR44 battery.


  1. Remove protective cap.
  2. First rinse the electrode with distilled water and suck it with filter paper.
  3. Turn the meter on by pressing “ON/OFF” key.
  4. Immerse the pH meter electrode in the solution to be tested (should not be over the immersion line).
  5. Stir gently and wait around 30 seconds till the reading stabilizes.
  6. After finishing, clear the electrode with pure water, turn the meter off by pressing “ON/OFF” key.
  7. Always replace the protective cap after use.


  1. Turn on PH meter
  2. Dissolve each buffer solution in 250ML of distilled water
  3. Immerse the electrode into the PH 6.86 solution (with temperature below 25C/77F)
  4. Press the “CAL(calibration) button for 5 seconds and release. A) Display will start flashing 6.86. B) Wait until the display stops flashing. C) Rinse the electrode with distilled water and dry it with filter paper.
  5. Immerse the electrode in PH 4.00 solution. A) Press “CAL” button for 5 seconds, then press and release immediately second time. B) Reading will start flashing 4.00. C) Wait until display stops flashing. D) Rinse and dry the electrode with distilled water as before.
  6. Place the meter back to the buffer solution to test calibration. If incorrect, please repeat the calibration
  7. If approximate PH of your test solution is known to be above 7.0, calibrate the meter using 6.86 and 9.18 solution. To do this, please follow the calibration chart, The third step is the calibration method for 9.18 point.